home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 9
/
Night Owl CD-ROM (NOPV9) (Night Owl Publisher) (1993).ISO
/
013a
/
ampro.exe
/
AUTOMATE.BAT
< prev
next >
Wrap
DOS Batch File
|
1993-02-01
|
3KB
|
47 lines
@Echo off
REM **************************************************************************
REM * Sample Batch file for setting up AutoMate/PRO to run with AutoCAD **
REM **************************************************************************
REM * *
REM * This file contains the commands that must be executed before config- *
REM * uring or running AutoCAD so that AutoCAD will be able to find and *
REM * invoke the AutoMate/PRO display and rendering driver. *
REM * *
REM * *
REM * Note: The SET ACADDRV statement shown below is needed for AutoCAD 12 *
REM * to tell AutoCAD where to find the drivers. The ACAD12\DRV *
REM * directory contains the Display, Digitizer and Plotter drivers *
REM * supplied by Autodesk for ACAD 12. The ACAD12 directory name *
REM * may be different on your system. The C:\AUTOMATE directory *
REM * contains the AutoMate/PRO display driver. *
REM * *
REM * It is very important that the ACADDRV variable get set correct- *
REM * ly so that AutoCAD 12 will find the Digitizer, and Plotter *
REM * drivers as well as the AutoMate/PRO display/rendering driver. *
REM **************************************************************************
REM ** The three SET statements below are for AutoCAD 11 , 10_c10, **
REM ** 3D-Studio and AutoShade 2.X. **
REM ** If you are Not going to be using 3D-Studio or AutoShade, you **
REM ** can remove the SET RCPADI and SET RDPADI statements. **
@Echo on
SET DSPADI=C:\AUTOMATE\RCAMATE.EXP
SET RCPADI=C:\AUTOMATE\RCAMATE.EXP
SET RDPADI=C:\AUTOMATE\RCAMATE.EXP
@Echo off
REM ** The SET statements below are examples for setting two other **
REM ** variables that Must be set before running AutoCAD Release 12. **
REM ** IMPORTANT: If your AutoCAD 12 Drive or Directory is different **
REM ** than the directory shown below, you will have to change **
REM ** them before using this batch file for AutoCAD 12. **
@Echo on
SET ACAD=D:\ACAD12\SUPPORT;D:\ACAD12\FONTS;D:\ACAD12\ADS
SET ACADDRV=D:\ACAD12\DRV;C:\AUTOMATE